Kerax KeraSoy 4120 Soy Blend Pillar Wax
Kerax KeraSoy 4120 Soy Blend Pillar Wax
Couldn't load pickup availability
Scroll Through These 20 Scents. Now 50% Off Until Sold Out!
-
Ordered
- - -
Order Ready
- - -
Delivered
Kerax KeraSoy 4120 Soy Blend Pillar Wax
KeraSoy Pillar Blend (4120) is a blend specifically developed for the production of Pillar candles and Wax Melts. It is suitable for further blending with fragrances and oil soluble dyestuffs.
Kerasoy Pillar blend is biodegradable and vegan friendly. No animal products are used and no animal testing has been carried out in its manufacture.
Old or partial candles may be re-melted and the wax reused but it is advisable not to heat the wax above 85°C or heating for extended lengths of time.
Waxes should be stored in a cool, dry location away from direct heat, sunlight and moisture.
Colour
Powder dyes may also be dissolved in fragrance and then added to the melted wax, be sure that the dye has dissolved completely before adding.
KeraSoy Pillar has been designed for fragrance at levels between 5 - 10%.
Burn pool size and depth greatly affect fragrance throw so correct wicking is paramount.
Natural waxes tend to require larger wick sizes than traditional paraffin waxes.
Fragrance, colour and candle configuration have a great impact on the best wick choice.
Too large of a wick may cause sooting, accelerated burn times and guttering (wax leaking through the side of the candle). Too small a wick will cause tunneling and produce a smaller flame. Keep wicks trimmed to ¼ inch.
If you experience poor flame quality or stability, try a different type of wick.
Test burning should be done after the candle has had a chance to sit for 48 hours after pouring.
Melting
Temporary high temperatures (up to 90°C) have no adverse effect as long as the wax is cooled back down quickly. Higher temperatures may cause the wax to discolour.
Allow the wax to cool to your desired pour temperature, add the fragrance and mix well. Be sure to stir/mix the wax while melting.
Avoid using Pillars containing copper and zinc as this may accelerate discolouration.
Stainless Steel is the material of choice although mild steel is acceptable.
Digital temperature probes are readily available and are a safer choice than the traditional Mercury in glass type.
Pouring
Pour temperatures may vary according to mould type & size, fragrance & dye used and the effects the candle maker wishes to achieve.
Greater release from the moulds may be achieved by pouring at temperature of around 55 - 65°C, although this will be dependent upon the size and shape of the candle being produced.
Fragrance should be added and mixed immediately prior to pouring where practical.
If you experience difficulties with your pour temperature, try a lower or higher temperature in increments of 5 - 10°C.
Consider pouring into pre heated moulds for enhanced release properties.
KeraSoy Pillar is formulated to require only a single pour, however for some large Pillars; a top-up is required to achieve the best candle surface.
A small amount of wax at a slightly warmer temperature than the candle was poured at can be used to top-up the candle before the candle is fully cool (pouring the top-up once the candle is completely cooled may result in a reduction of adhesion to the Pillar).
Candle Cooling
Cool undisturbed candles at room temperature (about 25°C). Candles should be allowed to sit undisturbed for 48 hours before test burning.
Test Burn: Check wicking. Test burn the candle for burn pool diameter and “mushrooming” after it has cooled for 48 hours.
Mushrooming is when carbon and/or other substances build up on the end of the wick interfering with combustion. Mushrooming can cause 'sooting' and poor odours.
Try different wicks until you have your desired burn pool diameter and a good clean flame.
Free Delivery & Shipping Info
Free Delivery & Shipping Info
Enjoy free standard delivery on all orders over £100. Want it sooner? We subsidise an express delivery option!
We post out all orders same day if placed before 11am (Mon-Fri). Depending on the delivery option selected, orders can take up to four working days to arrive.
In a hurry? We offer Express delivery options at checkout.
Fragrance Oil Additional Info
Fragrance Oil Additional Info
At Blossom Oils Ltd, we proudly align with IFRA UK's recommendations regarding animal welfare. We are committed to ensuring that none of our ingredients or fragrances are of animal origin. Additionally, none of our products are tested on animals.
Our highly concentrated fragrance oils are designed to deliver exceptional performance across a variety of applications. Perfect for use in home fragrance creations like wax melts and candles, as well as personal care products such as soaps, cosmetics, and bath bombs. For guidance on safe usage rates tailored to your specific project, consult the relevant IFRA standards.
Our fragrances are entirely free from animal-derived ingredients and do not come into contact with materials that could be derived from animals during manufacturing. This ensures they are completely free from Bovine Spongiform Encephalopathy (BSE) and Transmissible Spongiform Encephalopathies (TSE).
Our finished products are carefully crafted using a blend of natural (vegetable origin), nature-identical, and synthetic raw materials to deliver high quality, cruelty-free fragrances.
Why Choose Blossom Oils?
Free CLP Labels
Why mess around making your own when we can supply them with your order for free.
Next Day Delivery
We work fast to ensure your business runs smoothly
Friendly Support Team
We always aim to answer enquiries the very same day to ensure you get the suport you need.
Unique Scents
With over 200 Unique scents that you won't find anywhere else, we help your business stand out from the rest.